Pallets for chemicals and resin

01 What ships

The Ohio valley, Beaver County and the airport area carry the region's chemical story: resin pellets from the Shell complex in Potter Township, carbon on Neville Island, industrial gases and ceramics powders in Leetsdale, and a chemicals headquarters in Moon Township. Pellets go in bags and boxes, chemicals in drums and totes. The 48 x 48 is often used in the chemical sector, and 48 x 42 is listed for chemical and beverage.

02 Spec checklist

03 Dry matters

Resin and powders are moisture-sensitive, and a damp pallet sweats under a bag. The moisture guide explains the 20% threshold.

04 Where to look next

• Potter Township
• Neville Island
• Leetsdale

05 Bags, drums and totes

Resin ships in 25 kg bags stacked in a pattern of interlocked layers, in boxes holding hundreds of kilograms, or in totes. Each has a different demand. Bagged pellets slip if the deck is rough, so smooth, fully boarded decks matter. Drums need a pallet that holds them in place; totes need a pallet whose bottom allows a forklift to lift a heavy, liquid-filled container safely.

Because resin and chemical plants take pride in cleanliness, a stray wood chip or an insect in a bag is a quality problem. Buyers in this sector often ask for heat treated lumber with a mark, and sometimes for pallets that have never been stored outdoors.

06 Words to put on a request

• Bag, drum or tote, and how many to a pallet.
• Total weight per pallet in pounds.
• Indoor or outdoor storage before use.
• Whether the pallet is single use or returned.

07 Chemical pallets in the standards

PHS lists 48 x 48 inches third and 48 x 42 inches fifth among North American sizes, with chemical and beverage the main users of the latter, and 44 x 44 inches eighth for drums and chemicals. It also describes CP pallets as a separate European type for chemicals, made of wood or plastic.